Vlakslijpmachine / Surface Grinder - onderhoud/maintenance informatie: verschil tussen versies
(Nieuwe pagina aangemaakt met 'Temporary page to hold the data on a possible surface grinder. Model - most likely a Jung F40 or a variation thereof Probably has a compact cooling/filtering unit...') |
|||
Regel 1: | Regel 1: | ||
+ | [[Category:Tool]][[Category:Metal]][[Category:SafetySheet]] | ||
+ | {{SafetyCat2}} | ||
+ | {{NoiseCat2}} | ||
+ | |||
Temporary page to hold the data on a possible surface grinder. | Temporary page to hold the data on a possible surface grinder. | ||
Regel 14: | Regel 18: | ||
Approx size including 'movement: 1350x1200'; 1600 high | Approx size including 'movement: 1350x1200'; 1600 high | ||
+ | |||
+ | == Safety == | ||
+ | |||
+ | Document safe-side/kickback |
Versie van 25 okt 2020 om 16:09
This equipment is safety category 2:
- Mandatory instructions.
- [liability waiver] on file.
- Approval from trustees, but ok to operate alone
- (but be careful/ensure you have assistance when handling very large things).
With respect to noise - be kind and considerate after 19:00 - and limit yourself to sporadic low-noise use.
This equipment is Noise Category 2:
Can be used at all hours, but in moderation.
Be considerate; if you feel you need to wear ear protection,
then only use the tool between 07:00 and 19:00.
Temporary page to hold the data on a possible surface grinder.
Model - most likely a Jung F40 or a variation thereof
Probably has a compact cooling/filtering unit which is currently mounted at the back.
Grind range 300mm; magchuck 320
Table 1300 x 210
Stone: 200mm x 20mm
Powr: 400 v / 5.8 Ampere; 220v needed for the controls
Approx size including 'movement: 1350x1200'; 1600 high
Safety
Document safe-side/kickback