Vlakslijpmachine / Surface Grinder - onderhoud/maintenance informatie

This equipment is safety category 2:

• Mandatory instructions.
• [liability waiver] on file.
• Approval from trustees, but ok to operate alone

(but be careful/ensure you have assistance when handling very large things).

With respect to noise - be kind and considerate after 19:00 - and limit yourself to sporadic low-noise use.

This equipment is Noise Category 2:
Can be used at all hours, but in moderation.
Be considerate; if you feel you need to wear ear protection,
then only use the tool between 07:00 and 19:00.

Temporary page to hold the data on a possible surface grinder.

Model - most likely a Jung F40 or a variation thereof. Probably has a compact cooling/filtering unit which is currently mounted at the back.

Sales catalog

.

Grind range 300mm; magchuck 320

Table 1300 x 210

Stone: 200mm x 20mm

Power: 400 v / 5.8 Ampere; 220v needed for the controls.

May need a slow starter.

Electrics - probably had some safety upgrade

Approx size including 'movement: 1350x1200'; 1600 high

Safety

Document safe-side/kickback

Document carbite/mask/etc risks.