Metal Drills: verschil tussen versies

Uit MakerSpace Leiden
Naar navigatie springen Naar zoeken springen
Nieuwe pagina aangemaakt met 'Categorie:ToolCategorie:MetalCategorie:SmallCategorie:Boren {{SafetyCat6}} {{NoiseCat3}} miniatuur We keep a set of d...'
 
Geen bewerkingssamenvatting
Regel 4: Regel 4:


[[Bestand:gdrills-box.jpeg|miniatuur]]
[[Bestand:gdrills-box.jpeg|miniatuur]]
[[Bestand:ydrills-box.jpeg|miniatuur]]


We keep a set of drills for general use next to the [[Arboga GM 2508 Geared Head Drill Press Pillar Drill]].
We keep a set of 1-13 mm drills in steps of 0.5 for general use next to the [[Arboga GM 2508 Geared Head Drill Press Pillar Drill]].
 
There is also a set of 0.3 to 3.2 in the drawer below it.
   
   
= See also =
= See also =

Versie van 8 mei 2023 14:24

This equipment is safety category 6: Other equipment with no limits.

This equipment is Noise Category 3: Can be used at all hours. No limits.

We keep a set of 1-13 mm drills in steps of 0.5 for general use next to the Arboga GM 2508 Geared Head Drill Press Pillar Drill.

There is also a set of 0.3 to 3.2 in the drawer below it.

See also

Boorsnelheid RPM / drilling speed and Cutting oil

History

Space; regulary replaced. Replacements are in the drawers below; in the red/grey cabinet.