Metal Drills: verschil tussen versies
| Regel 10: | Regel 10: | ||
There is also a set of 0.3 to 3.2 in the drawer below it. | There is also a set of 0.3 to 3.2 in the drawer below it. | ||
| + | = Chore = | ||
| + | |||
| + | There is a 2-weekly chore to replace any missing/blunt drills from those we keep in supply in the drawer. | ||
| + | |||
| + | Do not take drills from the supply needlessly. Either the drill in the box is blunt and needs to be replaced. Or it is not. And you should not take a drill from supplies. If you feel your work is so important that you can only use new drills - then buy them personally and keep them in your cabinet. | ||
| + | |||
= See also = | = See also = | ||
Versie van 8 mei 2023 om 15:27
This equipment is safety category 6: Other equipment with no limits.
This equipment is Noise Category 3: Can be used at all hours. No limits.
We keep a set of 1-13 mm drills in steps of 0.5 for general use next to the Arboga GM 2508 Geared Head Drill Press Pillar Drill.
There is also a set of 0.3 to 3.2 in the drawer below it.
Chore
There is a 2-weekly chore to replace any missing/blunt drills from those we keep in supply in the drawer.
Do not take drills from the supply needlessly. Either the drill in the box is blunt and needs to be replaced. Or it is not. And you should not take a drill from supplies. If you feel your work is so important that you can only use new drills - then buy them personally and keep them in your cabinet.
See also
Boorsnelheid RPM / drilling speed and Cutting oil
History
Space; regulary replaced. Replacements are in the drawers below; in the red/grey cabinet.
