Figuurzaag Jigsaw

This equipment is safety category 6: Other equipment with no limits.

This equipment is safety category 6: Other equipment with no limits.

This equipment is Noise Category 3: Can be used at all hours. No limits.

We have a hand held jigsaw (sometimes called a Scroll saw) and clamp. See also its electrical equivalent and the Decoupeerzaag.

Location

The Jigsaw is hanging on the left wall when entering the wood working space

The Jigsaw blades: In an plastic box above the wood working bench

Supplies

The spare blades are in the red tool box that is also located in the left hand corner when entering the woodworking space on the shelf directly below where the saw is hanging.

The blades will wear out/break; so we will run out of them at some point - and the space will replace them. The are the same blades that some of our electric jig/scroll-saws use. -Not sure about this (see comment on pins on ends below) - AY

Ask on the mailing lists to get them ordered --or-- buy a set from [Hartwijk] or the Gamma (about the same price & quality) and give the receipt to one of the Trustees.

Anything under 5 euro's for a handful of blades is ok. Be carful the handheld saw needs the very thin blades -without- the pins on either end (or if they have a pin at the end - make sure there is at least 9-12mm of flat' between the pin and where the rotation starts; as to allow it to be clamped. (The Electric Jigsaws need a different type). Know that in a pinch you can sometimes remove the pin and use them anyway.

Ownership

Henry; on long term loan (See Categorie:OnLoan).

History

Brought in by Henry early 2020.

Figuurzaag / Jigsaw