Hand Router / Bovenfrees: verschil tussen versies
(Nieuwe pagina aangemaakt met 'Category:SafetySheetCategory:ToolCategory:WoodCategory:Metal{{SafetyCat6}}{{NoiseCat2}}Category:OnLoan Electric hand router. We have several on...') |
|||
(13 tussenliggende versies door een andere gebruiker niet weergegeven) | |||
Regel 1: | Regel 1: | ||
− | [[Category:SafetySheet]][[Category:Tool]][[Category:Wood]][[Category:Metal]]{{SafetyCat6}}{{NoiseCat2}}[[Category:OnLoan]] | + | [[Category:SafetySheet]][[Category:Tool]][[Category:Wood]][[Category:Metal]]{{SafetyCat6}}{{NoiseCat2}}{{DustControl3}}[[Category:OnLoan]][[Categorie:Imperial]] |
+ | [[Categorie:Tools]][[Categorie:Metal working tools]][[Categorie:Wood working tools]] | ||
+ | [[Bestand:frezen1.jpeg|miniatuur]] | ||
+ | [[Bestand:frezen2.jpeg|miniatuur]] | ||
Electric hand router. We have several ones; from very light to quite heavy as well as a [[Router Table]]. | Electric hand router. We have several ones; from very light to quite heavy as well as a [[Router Table]]. | ||
+ | |||
+ | Be very careful with the collet sizes; we have both Imperial and Metric ones; in 1/4th of an inch; 6mm and 8mm. | ||
+ | |||
+ | Know that 1/4 of an inch is almost 6mm - but not quite. Putting a 6mm bit into a 1/4th of an inch collet or vise versa will absolotely ruin it. And they are expensive and hard to replace (long lead team; 30-60 euro's). | ||
+ | |||
+ | So check that your cutter shank fits absolutely perfectly in the collet; with virtually no wobble even when not yet tightened. | ||
= Ownership = | = Ownership = | ||
− | The Green Bosch | + | The Green Bosch POF 1400 ACE is owned by Ramon, it is labeled. See [[:Category:OnLoan]]. |
+ | |||
+ | Een Groene Bosch bovenfrees is van Ronald.[[:Category:OnLoan]]. | ||
+ | |||
+ | Een Groene Bosch bovenfrees is van Alex. [[:Category:OnLoan]]. | ||
+ | |||
+ | The light blue one has been donated to the space by Dirk. | ||
+ | |||
+ | {{Sjabloon:Imperial}} |
Versie van 8 jul 2024 om 13:38
This equipment is safety category 6: Other equipment with no limits.
This equipment is Noise Category 2:
Can be used at all hours, but in moderation.
Be considerate; if you feel you need to wear ear protection,
then only use the tool between 07:00 and 19:00.
This equipment is ought to be used with active dust control if you use it for more than 10-15 minutes in total.
Electric hand router. We have several ones; from very light to quite heavy as well as a Router Table.
Be very careful with the collet sizes; we have both Imperial and Metric ones; in 1/4th of an inch; 6mm and 8mm.
Know that 1/4 of an inch is almost 6mm - but not quite. Putting a 6mm bit into a 1/4th of an inch collet or vise versa will absolotely ruin it. And they are expensive and hard to replace (long lead team; 30-60 euro's).
So check that your cutter shank fits absolutely perfectly in the collet; with virtually no wobble even when not yet tightened.
Ownership
The Green Bosch POF 1400 ACE is owned by Ramon, it is labeled. See Category:OnLoan.
Een Groene Bosch bovenfrees is van Ronald.Category:OnLoan.
Een Groene Bosch bovenfrees is van Alex. Category:OnLoan.
The light blue one has been donated to the space by Dirk.
WARNING: Imperial tools have slightly different sizes than Metric ones.
Using the wrong one will often damage the bolt, nut or whatever you are working on. See this list for all the imperial tools we have.
Try not to mix them with our metric tools -- to make sure your fellow maker does not ruin their work.
Be especially careful with the close friends, such as sizes like 5/8inch and 16mm;
although the difference is 0.13mm - you will ruin (or usually just crack) a collet or similar..