Drill Press Wood / Boorkolom hout: verschil tussen versies
(Nieuwe pagina aangemaakt met ' Changing speeds: https://www.youtube.com/watch?v=hbig6nOl398 Speed listing: http://engineering.ucdavis.edu/wp-content/uploads/2013/08/lathespeeds.pdf') |
|||
| (25 tussenliggende versies door 4 gebruikers niet weergegeven) | |||
| Regel 1: | Regel 1: | ||
| + | {{SafetyCat4}} {{NoiseCat2}} | ||
| + | [[Category:SafetySheet]][[Category:Tool]][[Category:Wood]] | ||
| + | [[Categorie:Tools]][[Categorie:Wood working tools]] | ||
| + | [[Bestand:drill-press-safety-sheet.png|right|400px|safety sheet drill press]] | ||
| − | + | We have two drill presses- this one in the wood shop, and a heavier one in the metal area [[Arboga GM 2508 Geared Head Drill Press Pillar Drill|Drill Press Metal]]. | |
| − | + | Cutting wood in the metal area is fine. Cutting metal in the wood area is frowned upon. If you do so - de-grease the machine/plateau post use ! | |
| + | |||
| + | See also: [[Wood Drills]], [[Large HSS drills]] and [[Spade drills]]. | ||
| + | |||
| + | == Safety == | ||
| + | The drill press in the Wood Shop is classed as a normal, somewhat dangerous machine: instructions strongly advised but not mandatory. It can be used any hours -- but be kind to our neighbours. | ||
| + | |||
| + | Use of safety glasses will generally be needed. And the use of gloves is possible; but a mixed blessing. It increases the risk of your glove (and with it your finger) getting twisted around the drill/rotating head. | ||
| + | |||
| + | Its main risks are flying sharp bits, getting caught in something rotating or your workpiece rotating/spinning. | ||
| + | |||
| + | So clamp things well. | ||
| + | |||
| + | == Also Known As == | ||
| + | * Pillar Drill, Boorkolom, Kolomboor, Kolom boor | ||
Huidige versie van 2 okt 2024 om 21:25
This equipment is safety category 4:
- In-person, instructions strongly advised but not mandatory.
- Reading, and following, the instructions on the Wiki is mandatory!
This equipment is Noise Category 2:
Can be used at all hours, but in moderation.
Be considerate; if you feel you need to wear ear protection,
then only use the tool between 07:00 and 19:00.
We have two drill presses- this one in the wood shop, and a heavier one in the metal area Drill Press Metal.
Cutting wood in the metal area is fine. Cutting metal in the wood area is frowned upon. If you do so - de-grease the machine/plateau post use !
See also: Wood Drills, Large HSS drills and Spade drills.
Safety
The drill press in the Wood Shop is classed as a normal, somewhat dangerous machine: instructions strongly advised but not mandatory. It can be used any hours -- but be kind to our neighbours.
Use of safety glasses will generally be needed. And the use of gloves is possible; but a mixed blessing. It increases the risk of your glove (and with it your finger) getting twisted around the drill/rotating head.
Its main risks are flying sharp bits, getting caught in something rotating or your workpiece rotating/spinning.
So clamp things well.
Also Known As
- Pillar Drill, Boorkolom, Kolomboor, Kolom boor
