Drill Press Wood / Boorkolom hout: verschil tussen versies

Uit MakerSpace Leiden
Ga naar: navigatie, zoeken
 
(3 tussenliggende versies door dezelfde gebruiker niet weergegeven)
Regel 1: Regel 1:
 +
[[Category:Tools]][[Category:Wood working tools]][[Category:SafetySheet]]
 
{{SafetyCat4}} {{NoiseCat2}}
 
{{SafetyCat4}} {{NoiseCat2}}
 
[[Category:Metal]][[Category:SafetySheet]][[Category:Tool]][[Category:Wood]]
 
[[Categorie:Tools]][[Categorie:Metal working tools]][[Categorie:Wood working tools]]
 
 
[[Bestand:drill-press-safety-sheet.png|right|400px|safety sheet drill press]]
 
[[Bestand:drill-press-safety-sheet.png|right|400px|safety sheet drill press]]
  
We have two drill presses- this one in the wood shop, and a heavier one in the metal area [[Arboga GM 2508 Geared Head Drill Press Pillar Drill|Drill Press Metal]].  
+
We have two drill presses- this one in the wood shop, and a heavier one in the metal area [[Drill Press Metal / Kolomboor metaal|Drill Press Metal]].  
  
 
Cutting wood in the metal area is fine. Cutting metal in the wood area is frowned upon. If you do so - de-grease the machine/plateau post use !
 
Cutting wood in the metal area is fine. Cutting metal in the wood area is frowned upon. If you do so - de-grease the machine/plateau post use !
Regel 19: Regel 17:
  
 
So clamp things well.
 
So clamp things well.
 +
 +
== Also Known As ==
 +
* Pillar Drill, Boorkolom, Kolomboor, Kolom boor

Huidige versie van 11 nov 2024 om 23:05

This equipment is safety category 4:

  • In-person, instructions strongly advised but not mandatory.
  • Reading, and following, the instructions on the Wiki is mandatory!

This equipment is Noise Category 2:
Can be used at all hours, but in moderation.
Be considerate; if you feel you need to wear ear protection,
then only use the tool between 07:00 and 19:00.

safety sheet drill press

We have two drill presses- this one in the wood shop, and a heavier one in the metal area Drill Press Metal.

Cutting wood in the metal area is fine. Cutting metal in the wood area is frowned upon. If you do so - de-grease the machine/plateau post use !

See also: Wood Drills, Large HSS drills and Spade drills.

Safety

The drill press in the Wood Shop is classed as a normal, somewhat dangerous machine: instructions strongly advised but not mandatory. It can be used any hours -- but be kind to our neighbours.

Use of safety glasses will generally be needed. And the use of gloves is possible; but a mixed blessing. It increases the risk of your glove (and with it your finger) getting twisted around the drill/rotating head.

Its main risks are flying sharp bits, getting caught in something rotating or your workpiece rotating/spinning.

So clamp things well.

Also Known As

  • Pillar Drill, Boorkolom, Kolomboor, Kolom boor