Wood Bandsander: verschil tussen versies

Uit MakerSpace Leiden
Ga naar: navigatie, zoeken
Regel 1: Regel 1:
 
[[Category:Wood]][[Category:SafetySheet]][[Category:Tool]][[Category:OnLoan]]
 
[[Category:Wood]][[Category:SafetySheet]][[Category:Tool]][[Category:OnLoan]]
{{SafetyCat4}} {{NoiseCat2}}{{DustControl2}}
+
{{SafetyCat4}} {{NoiseCat2}}{{DustControl1}}
  
 
Green Wood bandsander in the wood shop. Be sure to use dust control !
 
Green Wood bandsander in the wood shop. Be sure to use dust control !

Versie van 22 mrt 2020 om 13:12

This equipment is safety category 4:

  • In-person, instructions strongly advised but not mandatory.
  • Reading, and following, the instructions on the Wiki is mandatory!

This equipment is Noise Category 2:
Can be used at all hours, but in moderation.
Be considerate; if you feel you need to wear ear protection,
then only use the tool between 07:00 and 19:00.

This equipment MUST be used with active dust control:

  • Connect a shop-vac prior to use and keep it on while using it.
  • Let it run for 10-20 seconds post use.


Not doing so endangers the operator, others, the space and the equipment.


Regarding the DeWalt Wood Chip Extractor:

  • Do not fill the bag past 2/3rd of its capacity.
  • Check for enough airflow before using the connected tool.
  • Check that there is no (hot/smoldering) wood in the bottom of the machine when you smell something.

Green Wood bandsander in the wood shop. Be sure to use dust control !

Usually on the bench at the far end; next to the OscillatingBobbinSander and AfkortZaag.

See also the hand held Hand_Bandsanders