MT2: verschil tussen versies

Uit MakerSpace Leiden
Ga naar: navigatie, zoeken
(Nieuwe pagina aangemaakt met 'We have various MT2 (Morse Taper 2) holders and machines (Abene VHF3 Metaalfrees machine,Houtdraaibank, Metaaldraaibank, pillar drills and several adapt...')
 
 
(9 tussenliggende versies door 2 gebruikers niet weergegeven)
Regel 1: Regel 1:
We have various MT2 (Morse Taper 2) holders and machines ([[Abene VHF3 Metaalfrees machine]],[[Houtdraaibank]], [[Metaaldraaibank]], pillar drills and several adaptors.
+
[[Categorie:Tool]][[Categorie:Metal]][[Categorie:Small]][[Categorie:Wood]]
 +
{{SafetyCat6}}{{NoiseCat3}}
  
* [[Pijp-center Tail - Stock Pipe Center]]
+
We have various MT2 ([https://en.wikipedia.org/wiki/Machine_taper Morse Taper 2]) holders and machines.
* [[MT2 Hand chuck]]
+
 
* others still to do...
+
 
 +
[[Bestand:MT2TaperTooling01.jpg|thumb|MT2 tooling setup next to the lathe]]
 +
[[Bestand:MT2ER25Collet01.jpg|thumb|MT2 ER25 Collet Holder]]
 +
[[Bestand:MT2-MT4-01.jpg|thumb|MT2 to MT4 adapter to allow putting MT2 items to fit in the lathe chuck spindle]]
 +
 
 +
 
 +
Such as:
 +
 
 +
* [[Pijp-center Tail - Stock Pipe Center]] voor dikke pijpen
 +
* Diverse [[MT2 Hand chuck]]
 +
* [[ER 25/32/40 Collets and holders]] met MT2 einde.
 +
* Diverse houders en adaptors om dingen onder een hoek vast te houden. (Where are they?)
 +
* Live centre
 +
* Dead centre
 +
* Tap houders. (Where are these stored?}
 +
* 22mm drill
 +
 
 +
And these can be used on several machines:
 +
 
 +
* [[Abene VHF3 Metaalfrees machine]]
 +
* [[Houtdraaibank]]
 +
* [[Metaaldraaibank]]
 +
* [[Drill press / boorkolom]]
 +
 
 +
Useful too:
 +
 
 +
* [[MT2/MT4|MT2/MT4 convertor]]

Huidige versie van 31 mei 2024 om 22:11

This equipment is safety category 6: Other equipment with no limits.

This equipment is Noise Category 3: Can be used at all hours. No limits.

We have various MT2 (Morse Taper 2) holders and machines.


MT2 tooling setup next to the lathe
MT2 ER25 Collet Holder
MT2 to MT4 adapter to allow putting MT2 items to fit in the lathe chuck spindle


Such as:

And these can be used on several machines:

Useful too: