Drills, Machinist set: verschil tussen versies

Uit MakerSpace Leiden
Naar navigatie springen Naar zoeken springen
Geen bewerkingssamenvatting
Geen bewerkingssamenvatting
Regel 3: Regel 3:
{{NoiseCat3}}
{{NoiseCat3}}


[[Bestand:mdrills-box.jpeg|miniatuur|Doos 1-6]]
[[Bestand:mdrills-box2.jpeg|miniatuur|Doos 1-6]]
[[Bestand:mdrills-box2.jpeg|miniatuur|Doos 6-12]]
[[Bestand:mdrills-box.jpeg|miniatuur|Doos 6-12]]


We keep a set of drills; 0.1mm steps separate from our normal [[Drills]] in the blue cabinet. This is for use of those that had [[Huvema HU760 Draaibank|Metal lathe]] and [[Abene VHF3 Metaalfrees machine|Metal router]] instructions only.
We keep a set of drills; 0.1mm steps separate from our normal [[Drills]] in the blue cabinet. This is for use of those that had [[Huvema HU760 Draaibank|Metal lathe]] and [[Abene VHF3 Metaalfrees machine|Metal router]] instructions only.

Versie van 8 mei 2023 14:08

This equipment is safety category 6: Other equipment with no limits.

This equipment is Noise Category 3: Can be used at all hours. No limits.

Doos 1-6
Doos 6-12

We keep a set of drills; 0.1mm steps separate from our normal Drills in the blue cabinet. This is for use of those that had Metal lathe and Metal router instructions only.

See also

Boorsnelheid RPM / drilling speed and Cutting oil