Japanese Saw: verschil tussen versies

Uit MakerSpace Leiden
Ga naar: navigatie, zoeken
(Nieuwe pagina aangemaakt met ' We have a Japanese saw')
 
Regel 1: Regel 1:
 +
[[Category:Tools]][[Category:Wood working tools]]
 +
{{SafetyCat6}}
 +
{{NoiseCat3}}
 +
=Intro=
  
 +
We have a Japanese saw. It's an Augusta 240mm Ryoba pull saw.
  
We have a Japanese saw
+
 
 +
==Usage==
 +
 
 +
Unlike western saws, Japanese saws cut on the pull stroke, not the push stroke. This allows for a thinner saw, and resulting thinner kerf. But care has to be taken not to buckle the saw.
 +
 
 +
==Replacement blade==
 +
 
 +
The blade on this saw is induction hardened and cannot be resharpened. The blade is simply replaced (do not bin the old one, give it to the people who use the [[Forge_/_Smeedoven]] it's good quality steel.
 +
 
 +
A new blade can be purchased from: https://www.augusta-heckenrose.de/en/produkt/spare-blade-for-ryoba-240-mm/

Versie van 30 jan 2025 om 00:32

This equipment is safety category 6: Other equipment with no limits.

This equipment is Noise Category 3: Can be used at all hours. No limits.

Intro

We have a Japanese saw. It's an Augusta 240mm Ryoba pull saw.


Usage

Unlike western saws, Japanese saws cut on the pull stroke, not the push stroke. This allows for a thinner saw, and resulting thinner kerf. But care has to be taken not to buckle the saw.

Replacement blade

The blade on this saw is induction hardened and cannot be resharpened. The blade is simply replaced (do not bin the old one, give it to the people who use the Forge_/_Smeedoven it's good quality steel.

A new blade can be purchased from: https://www.augusta-heckenrose.de/en/produkt/spare-blade-for-ryoba-240-mm/