Decoupeerzaag (Electric Jigsaw): verschil tussen versies

Uit MakerSpace Leiden
Naar navigatie springen Naar zoeken springen
Geen bewerkingssamenvatting
Geen bewerkingssamenvatting
Regel 1: Regel 1:
[[Category:SafetySheet]][[Category:Tool]][[Category:Wood]][[Category:Metal]]{{SafetyCat6}}{{NoiseCat3}}
[[Category:SafetySheet]][[Category:Tool]][[Category:Wood]][[Category:Metal]]{{SafetyCat6}}{{NoiseCat3}}


Use of protective eye wear strongly recommended.


We have several electrical jigsaws (of Decoupeerzagen in het Nederlands).  
We have several electrical jigsaws (of Decoupeerzagen in het Nederlands).  
Regel 9: Regel 8:
[[Bestand:Elec-decoupeerzaag.jpg|miniatuur]]
[[Bestand:Elec-decoupeerzaag.jpg|miniatuur]]


== Safety ==
[[Bestand:Eye&ear.jpg]]
Bril op!
Gehoorbescherming op!
Safety glasses on!
Ear protection on!


== dust control ==
== dust control ==


You probably want to attach one of the vacuum cleaners or MOT units to contain dust.
You probably want to attach one of the vacuum cleaners or MOT units to contain dust. Use a dusk mask when working with unhealthy wood types (e.g. certain tropical types, MDF, etc) for prolonged periods of time.


== blades ==
== blades ==

Versie van 29 nov 2018 10:39

This equipment is safety category 6: Other equipment with no limits.

This equipment is Noise Category 3: Can be used at all hours. No limits.


We have several electrical jigsaws (of Decoupeerzagen in het Nederlands).

We do not yet have a fixed places for the replacement saw blades.

Safety

Bril op! Gehoorbescherming op!

Safety glasses on! Ear protection on!

dust control

You probably want to attach one of the vacuum cleaners or MOT units to contain dust. Use a dusk mask when working with unhealthy wood types (e.g. certain tropical types, MDF, etc) for prolonged periods of time.

blades

Blades break easily; spare ones cost around a 5 for a pack of 5 or so. New ones are above the woodshop bench (though we run out regularly).

If you need blades for them; [Hartwijk] and the local builder shops usually have them. You really want the right type for wood, metal or whatever you are sawing. Most people keep a set of private ones.

If you want to be re-imbursed; keep the receipt & tell the mailing lists that you've bought them.

use

These machines are for wood and metal; but acrylic and similar materials work fine.

Metal use

Do not use the machine in the woodshop for metal (to avoid contaminating the wood with oil and filing; this ruining peoples lacquer).

Instead take one of the machines from the cupboard to the metal shop and use it there. And clean well afterwards.