ER 25/32/40 Collets and holders

ER25 metric collet set

Set of METRIC collets -- for the ER25 holder of theAbene VHF3 Metaalfrees machine, Metal lathe,Wood Lathe and various other MT2 taper tools/

Sizes 1mm - 15mm -- and each will take 1mm smaller. So actual range is 0 to 15mm. Do not use them outside this range. They will break (check the box with the boring bar for examples).

Make sure you `angle-click' the collet into the nut (do not force it straight). Have someone show you if you've not done it before -- as it is easy to get them out of shape this way -- causing vibration.

Todo

Would be nice to make / find a box for them.

History

Bought June 2019.

Rules

This equipment is safety category 5: Equipment that is relatively fragile or expensive

• In person instructions is not mandatory.
• Reading the wiki, and following the instructions, is mandatory.

This equipment is Noise Category 3: Can be used at all hours. No limits.

Box

Template for a box.