Verzinkboren - countersink drill - counterbore: verschil tussen versies
(→Wood) |
|||
Regel 13: | Regel 13: | ||
[[Bestand:Wood-counter-bore.jpg|miniatuur|Counterbore/countersink drill/verzinkboor - type voor WOOD/Hout]] | [[Bestand:Wood-counter-bore.jpg|miniatuur|Counterbore/countersink drill/verzinkboor - type voor WOOD/Hout]] | ||
− | There are special wood ones in the wood area - kept in the red box with drills on the workbench side of the woodship. | + | There are special wood ones in the wood area - kept on the stand of the [[DeWalt Handdrill]] and [[DeWalt Impact drill/electric screwdriver]]; in front of the red box with [[Wood Drills|drills]] on the workbench side of the woodship. |
There is a wooden box with small ones above the mitre saw. | There is a wooden box with small ones above the mitre saw. |
Versie van 19 dec 2019 om 19:28
This equipment is safety category 6: Other equipment with no limits.
This equipment is Noise Category 3: Can be used at all hours. No limits.
Metal
There is a large, blue, box of 8 sizes of metal countersink drills in the metal workshop -- use speeds about 30-60% lower than normal for that diameter - and Cutting oil.
This includes angled and square ones.
Wood
There are special wood ones in the wood area - kept on the stand of the DeWalt Handdrill and DeWalt Impact drill/electric screwdriver; in front of the red box with drills on the workbench side of the woodship.
There is a wooden box with small ones above the mitre saw.