Drills, Machinist set: verschil tussen versies

Uit MakerSpace Leiden
Naar navigatie springen Naar zoeken springen
Geen bewerkingssamenvatting
Geen bewerkingssamenvatting
Regel 11: Regel 11:


[[Boorsnelheid RPM drilling speed|Boorsnelheid RPM / drilling speed]] and [[SnijOlie BoorOlie CuttingOil|Cutting oil]]
[[Boorsnelheid RPM drilling speed|Boorsnelheid RPM / drilling speed]] and [[SnijOlie BoorOlie CuttingOil|Cutting oil]]
= History =
Sets donated by Dirk-Willem mid 2019.
Sets replaced 8/6/2023 (paid by MSL)

Versie van 8 mei 2023 14:09

This equipment is safety category 6: Other equipment with no limits.

This equipment is Noise Category 3: Can be used at all hours. No limits.

Doos 1-6
Doos 6-12

We keep a set of drills; 0.1mm steps separate from our normal Drills in the blue cabinet. This is for use of those that had Metal lathe and Metal router instructions only.

See also

Boorsnelheid RPM / drilling speed and Cutting oil

History

Sets donated by Dirk-Willem mid 2019.

Sets replaced 8/6/2023 (paid by MSL)