SAFETY

Veiligheid

Verantwoordelijkheid

De eindverantwoorlijkheid voor een veilige werkomgeving en gedrag ligt bij het bestuur. Dat maakt de situatie anders dan thuis. Je hebt niet alleen jezelf heel te houden, maar ook anderen.

Deelnemers behoren zich veilig te gedragen, en onveilige gedragingen en situaties te melden bij het bestuur.

Bij aantal machines is het verplicht bepaalde storingen of problemen te melden. Dit dient zo snel mogelijk; maar uiterlijk binnen 24 te gebeuren. Dit staat in de machine beschrijving.

Index risico gereedscap

Risk categories:

1. Highest' risk: mandatory instructions, [liability waiver] on file, approval from the trustees, two people present at all times - and can only be used between 07:00 and 19:00.
2. High risk: Mandatory instructions, [liability waiver] on file, approval from the trustees, but Ok to operate alone.
3. Mandatory instructions prior to use.
4. Equipment that is dangerous - instructions strongly advised but not mandatory
5. Equipment that is relatively fragile or expensive - so instructions strongly advised if you have not used them before - but not mandatory
6. Other equipment with no limits - not considered overly dangerous.

Noice categories:

1. Can only be used between 07:00 and 19:00
2. Can be used outside those hours in moderation. But try to be considerate. And if you feel a need to wear ear protection - you are probably too noisy!
3. No limits.

Category 1

Highest category - mandatory instructions, [liability waiver] on file, approval from the trustees, two people present at all times - and can only be used between 07:00 and 19:00 as they make a lot of noise:

• Wood circle saw table - cirkelzaagtafel
• Planer - vandiktebank
• Jointer - vlakbank

Category 2

Mandatory instructions, [liability waiver] on file, approval from the trustees, but Ok to operate alone.

With respect to noise - be kind and considerate after 19:00 - and limit yourself to sporadic low-noise use:

• Wood bandsaw - lintzaag
• Wood lathe - houtdraaibank
• Metal lathe/draaibank
• Abene Mill - metaaalfrees
• Large Grinder / Grote Slijpert

Category 3

Mandatory instructions

• Large CNC cutter -- noise restructions: 07:00-19:00 only.
• Large Laser cutter (zie ook verplichte rapportage/kosten)
• Small Laser cutter (zie ook verplichte rapportage/kosten)
• Wood Mitre saw of Afkortzaag -- be considerate to our neighbours after 19:00.
• Welding_equipment (zie ook verplichte rapportage/kosten)
• 12 Ton Hydraulische Press
• Sanding_Cabinet
• Metal_bandsaw
• Vinyl_cutter
• PCB Reflow Oven
• T-Shirt_hotplate
• Ultimaker 3D Printer

Category 4

Equipment that is dangerous - instructions strongly advised but not mandatory

• Wood drill column
• Metal drill column
• Electric and battery powered tools (Drill, sander, orbital grinders, mill)
• Pneumatic tools (Nibbler, Sander, Grinder, Staple gun) -- be considerate to our neighbours after 19:00.
• Electric standing jigsaw for wood
• Electric band/disk grinder for wood
• Kleine slijpsteen

Category 5

Equipment that is relatively fragile or expensive - so instructions strongly advised if you have not used them before - but not mandatory

• Soldering equipment (air, tipped)
• De-soldeerbout - lucht
• Veneer calipers
• Various cutters for the Abene mill.
• Ritser - diamandpunt voor onderhoud slijpstenen.

Category 6

Other equipment with no limits

• 3 Ton hand pers/press
• Hand tools
• Measuring tools