Invalzaag

Uit MakerSpace Leiden
Versie door Ronald (overleg | bijdragen) op 27 jan 2022 om 14:02 (Nieuwe pagina aangemaakt met 'Category:SafetySheetCategory:ToolCategory:WoodCategory:Metal{{SafetyCat6}} This equipment is safety category 6: Other equipment with no limits....')
(wijz) ← Oudere versie | Huidige versie (wijz) | Nieuwere versie → (wijz)
Ga naar: navigatie, zoeken

This equipment is safety category 6: Other equipment with no limits.


This equipment is safety category 6: Other equipment with no limits.


This equipment is safety category 6: Other equipment with no limits.

This equipment is Noise Category 2:
Can be used at all hours, but in moderation.
Be considerate; if you feel you need to wear ear protection,
then only use the tool between 07:00 and 19:00.

Safety[edit | edit source]


Eye&ear.jpgBril op! Gehoorbescherming op!Safety glasses on! Ear protection on!dust control[edit | edit source]


You probably want to attach one of the vacuum cleaners or MOT units to contain dust. Use a dusk mask when working with unhealthy wood types (e.g. certain tropical types, MDF, etc) for prolonged periods of time.blades[edit | edit source]


Blades break easily; spare ones cost around a 5 for a pack of 5 or so. New ones are above the woodshop bench (though we run out regularly).If you need blades for them; [Hartwijk] and the local builder shops usually have them. You really want the right type for wood, metal or whatever you are sawing. Most people keep a set of private ones.If you want to be re-imbursed; keep the receipt & tell the mailing lists that you've bought them.use[edit | edit source]


These machines are for wood and metal; but acrylic and similar materials work fine.