Wood Drills

Uit MakerSpace Leiden
Versie door DirkWillem (overleg | bijdragen) op 22 mei 2019 om 18:11 (Nieuwe pagina aangemaakt met '{{SafetyCat5}} {{NoiseCat3}} Category:ToolCategory:Wood There are two sets of 3-10 mm wood drills in the workshop. These are meant for wood ONLY -- and are...')
(wijz) ← Oudere versie | Huidige versie (wijz) | Nieuwere versie → (wijz)
Ga naar: navigatie, zoeken

This equipment is safety category 5: Equipment that is relatively fragile or expensive

  • In person instructions is not mandatory.
  • Reading the wiki, and following the instructions, is mandatory.

This equipment is Noise Category 3: Can be used at all hours. No limits.

There are two sets of 3-10 mm wood drills in the workshop. These are meant for wood ONLY -- and are very useful when drilling in tropical/hard woords.

Tip.jpg

Do not use them for anything else. The very small points will break off.

Wooddrills.jpg