Wood Drills

This equipment is safety category 5: Equipment that is relatively fragile or expensive

• In person instructions is not mandatory.
• Reading the wiki, and following the instructions, is mandatory.

This equipment is Noise Category 3: Can be used at all hours. No limits.

There are two sets of 3-10 mm wood drills in the workshop. These are meant for wood ONLY -- and are very useful when drilling in tropical/hard woords.

Do not use them for anything else. The very small points will break off.

These drills are for wood only

See also the HSS Drills for general purpose drilling and [[Spade drills] for larger holes. Or the Gaten zaag if you need to drill very large holes.