Decoupeerzaag (Electric Jigsaw): verschil tussen versies

Uit MakerSpace Leiden
Ga naar: navigatie, zoeken
k (DirkWillem heeft pagina Decoupeerzaag hernoemd naar Decoupeerzaag (Electric Jigsaw))
(blades)
Regel 8: Regel 8:
 
[[Bestand:Elec-decoupeerzaag.jpg|miniatuur]]
 
[[Bestand:Elec-decoupeerzaag.jpg|miniatuur]]
  
 +
 +
== dust control ==
 +
 +
You probably want to attach one of the vacuum cleaners or MOT units to contain dust.
  
 
== blades ==
 
== blades ==

Versie van 29 nov 2018 om 12:37

This equipment is safety category 6: Other equipment with no limits.

This equipment is Noise Category 3: Can be used at all hours. No limits.


We have several electrical jigsaws (of Decoupeerzagen in het Nederlands).

We do not yet have a fixed places for the replacement saw blades.

Elec-decoupeerzaag.jpg


dust control

You probably want to attach one of the vacuum cleaners or MOT units to contain dust.

blades

Blades break easily; spare ones cost around a 5 for a pack of 5 or so. New ones are above the woodshop bench (though we run out regularly).

If you need blades for them; [Hartwijk] and the local builder shops usually have them. You really want the right type for wood, metal or whatever you are sawing. Most people keep a set of private ones.

If you want to be re-imbursed; keep the receipt & tell the mailing lists that you've bought them.

use

These machines are for wood and metal; but acrylic and similar materials work fine.

Metal use

Do not use the machine in the woodshop for metal (to avoid contaminating the wood with oil and filing; this ruining peoples lacquer).

Instead take one of the machines from the cupboard to the metal shop and use it there. And clean well afterwards.