Drills, Machinist set

This equipment is safety category 4:

• In-person, instructions strongly advised but not mandatory.
• Reading, and following, the instructions on the Wiki is mandatory!

This equipment is Noise Category 3: Can be used at all hours. No limits.

Doos 1-6

Doos 6-12

We keep a set of drills; 0.1mm steps separate from our normal Drills in the blue cabinet. This is for use of those that had Metal lathe and Metal router instructions only.

See also

Boorsnelheid RPM / drilling speed and Cutting oil

History

Sets donated by Dirk-Willem mid 2019.

Sets replaced 8/6/2023 (paid by MSL)