FLIR camera: verschil tussen versies

Uit MakerSpace Leiden
Ga naar: navigatie, zoeken
k (Fixed incorrect doubling of usage text (bug in wiki editor it seems))
 
(5 tussenliggende versies door 3 gebruikers niet weergegeven)
Regel 1: Regel 1:
[[Category:Tool]][[Category:Measuring]]
+
[[Bestand:Tg165.png|miniatuur]][[Category:Tool]][[Category:Measuring]]{{SafetyCat5}} {{NoiseCat3}}
  
=Device information=
+
 
Device information is available from the [https://www.flir.eu/support/products/tg165/#Documents#FLIR website]
+
FLIR TG165, [https://www.flir.com/support/products/tg165/#Documents Datasheet & User manual]
* [https://flir.netx.net/file/asset/10374/original/attachment#FLIR TG165 Datasheet]
 
* [https://flir.netx.net/file/asset/11379/original/attachment#FLIT TG165 User manual]
 
  
 
Images can be saved by 'pulling the trigger' and confirming to save the image. Please be aware to clear the microSD card before returning.
 
Images can be saved by 'pulling the trigger' and confirming to save the image. Please be aware to clear the microSD card before returning.
  
=Usage=
+
See also our [[Thermometer]] and [[Optical Thermometer]].
{{SafetyCat5}}
 
 
 
  
This equipment is safety category 5: Equipment that is relatively fragile or expensive
+
= Rules for borrowing it =
* In person instructions is not mandatory.
 
* Reading the wiki, and following the instructions, is mandatory.
 
  
 +
It is ok to borrow this tool for a few hours or a day - write your name on the list when you check it out & return it.
  
 +
= Location =
  
 +
Under the middle 3D printer.
  
 +
= History =
  
{{NoiseCat3}}This equipment is Noise Category 3: Can be used at all hours. No limits.<br  />
+
Bought by the space

Huidige versie van 29 mrt 2024 om 20:05

Tg165.png

This equipment is safety category 5: Equipment that is relatively fragile or expensive

  • In person instructions is not mandatory.
  • Reading the wiki, and following the instructions, is mandatory.

This equipment is Noise Category 3: Can be used at all hours. No limits.


FLIR TG165, Datasheet & User manual

Images can be saved by 'pulling the trigger' and confirming to save the image. Please be aware to clear the microSD card before returning.

See also our Thermometer and Optical Thermometer.

Rules for borrowing it

It is ok to borrow this tool for a few hours or a day - write your name on the list when you check it out & return it.

Location

Under the middle 3D printer.

History

Bought by the space