Mortise Drill / Vierkante gatenboor: verschil tussen versies

Uit MakerSpace Leiden
Ga naar: navigatie, zoeken
(Sjabloon TeVerwijderen toegevoegd. Gereedschap is niet meer op de space)
 
Regel 1: Regel 1:
[[Category:SafetySheet]][[Category:Tool]][[Category:Wood]][[Category:Metal]]{{SafetyCat3}}{{NoiseCat2}}[[Category:OnLoan]]
+
{{TeVerwijderen}}[[Category:SafetySheet]][[Category:Tool]][[Category:Wood]][[Category:Metal]]{{SafetyCat3}}{{NoiseCat2}}[[Category:OnLoan]]
 
[[Bestand:Vierkantegatenboor1.jpg|miniatuur|Vierkantegatenboor]]
 
[[Bestand:Vierkantegatenboor1.jpg|miniatuur|Vierkantegatenboor]]
 
[[Bestand:Vierkantegatenboor2.jpg|miniatuur|Vierkantegatenboor]]
 
[[Bestand:Vierkantegatenboor2.jpg|miniatuur|Vierkantegatenboor]]

Huidige versie van 18 jan 2024 om 16:04

Deze pagina kan worden verwijderd. Het is verouderd of onnodig.

This equipment is safety category 3:

  • Mandatory, in person, instructions.
  • Make sure you read the Wiki before asking.

This equipment is Noise Category 2:
Can be used at all hours, but in moderation.
Be considerate; if you feel you need to wear ear protection,
then only use the tool between 07:00 and 19:00.

Vierkantegatenboor
Vierkantegatenboor

Vierkante gatenboor / Mortise drill

Most lovely device. Drills square holes. Very useful. Must be seen to believe.

Not yet documented. Fair set of sizes.

Ownership

Owned by HansD. See Category:OnLoan.