Thermometer: verschil tussen versies

Uit MakerSpace Leiden
Ga naar: navigatie, zoeken
Regel 1: Regel 1:
[[Categorie:Tool]][[Category:Electronics]]
+
[[Categorie:Tool]]
  
 
[[Bestand:thermometer1.jpeg|miniatuur|Thermocouple meter]]
 
[[Bestand:thermometer1.jpeg|miniatuur|Thermocouple meter]]

Versie van 29 mrt 2024 om 15:11


Thermocouple meter

This equipment is Noise Category 3: Can be used at all hours. No limits.

This equipment is safety category 5: Equipment that is relatively fragile or expensive

  • In person instructions is not mandatory.
  • Reading the wiki, and following the instructions, is mandatory.

The space has a K-thermocouple thermometer with several probes; including a 'long' one to stick into ovens.

See this manual for details.

Box content

  • One meter (needs 9v battery)
  • One 30cm 'stick' probe
  • Two short wire probes
  • 2 page manual

Location

Thermocouple meter

3D Printer rack in wooden box - near the FLIR camera.

History

Bought by the space March 2024 with 3 probles.