Verzinkboren - countersink drill - counterbore: verschil tussen versies
(→Wood) |
|||
(5 tussenliggende versies door dezelfde gebruiker niet weergegeven) | |||
Regel 1: | Regel 1: | ||
− | [[Categorie:Tool]][[Categorie:Metal]][[Categorie:Small]] | + | [[Categorie:Tool]][[Categorie:Metal]][[Categorie:Small]][[Categorie:Boren]] |
{{SafetyCat6}} | {{SafetyCat6}} | ||
{{NoiseCat3}} | {{NoiseCat3}} | ||
Regel 8: | Regel 8: | ||
This includes angled and square ones. | This includes angled and square ones. | ||
+ | |||
+ | [[Bestand:metal-counter-bore.jpg|miniatuur|Counterbore/countersink metal]] | ||
+ | |||
+ | === Location === | ||
+ | |||
+ | Near the [[Arboga GM 2508 Geared Head Drill Press Pillar Drill|Pillar Drill]]. | ||
+ | |||
+ | == Metal - single cutter == | ||
+ | |||
+ | We also have single cutter counterbores. Make sure the hole is (1mm+ larger) than the minumum size before using them. So drill a 6mm hole if you want to use the 5-10 cutter. | ||
+ | |||
+ | [[Bestand:metal-counter-cutter.jpg|miniatuur|Counter cutter metal]] | ||
+ | |||
+ | === Location === | ||
+ | |||
+ | Near the [[Arboga GM 2508 Geared Head Drill Press Pillar Drill|Pillar Drill]]. | ||
== Wood == | == Wood == | ||
Regel 13: | Regel 29: | ||
[[Bestand:Wood-counter-bore.jpg|miniatuur|Counterbore/countersink drill/verzinkboor - type voor WOOD/Hout]] | [[Bestand:Wood-counter-bore.jpg|miniatuur|Counterbore/countersink drill/verzinkboor - type voor WOOD/Hout]] | ||
− | There are special wood ones in the wood area - kept in the red box with drills on the workbench side of the woodship. | + | There are special wood ones in the wood area - kept on the stand of the [[DeWalt Handdrill]] and [[DeWalt Impact drill/electric screwdriver]]; in front of the red box with [[Wood Drills|drills]] on the workbench side of the woodship. |
There is a wooden box with small ones above the mitre saw. | There is a wooden box with small ones above the mitre saw. | ||
+ | |||
+ | === Location === | ||
+ | |||
+ | Far side of the woodshop; above the [[Afkortzaag Hout / Miter Saw|Miter Saw]] and right of the pillar drill. | ||
+ | |||
+ | = History = | ||
+ | |||
+ | 2023-05-10 - spare ones bought |
Huidige versie van 10 mei 2023 om 12:15
This equipment is safety category 6: Other equipment with no limits.
This equipment is Noise Category 3: Can be used at all hours. No limits.
Metal
There is a large, blue, box of 8 sizes of metal countersink drills in the metal workshop -- use speeds about 30-60% lower than normal for that diameter - and Cutting oil.
This includes angled and square ones.
Location
Near the Pillar Drill.
Metal - single cutter
We also have single cutter counterbores. Make sure the hole is (1mm+ larger) than the minumum size before using them. So drill a 6mm hole if you want to use the 5-10 cutter.
Location
Near the Pillar Drill.
Wood
There are special wood ones in the wood area - kept on the stand of the DeWalt Handdrill and DeWalt Impact drill/electric screwdriver; in front of the red box with drills on the workbench side of the woodship.
There is a wooden box with small ones above the mitre saw.
Location
Far side of the woodshop; above the Miter Saw and right of the pillar drill.
History
2023-05-10 - spare ones bought