Verzinkboren - countersink drill - counterbore: verschil tussen versies
(→Wood) |
|||
| Regel 1: | Regel 1: | ||
| − | [[Categorie:Tool]][[Categorie:Metal]][[Categorie:Small]] | + | [[Categorie:Tool]][[Categorie:Metal]][[Categorie:Small]][[Categorie:Boren]] |
{{SafetyCat6}} | {{SafetyCat6}} | ||
{{NoiseCat3}} | {{NoiseCat3}} | ||
Versie van 8 mei 2023 om 16:03
This equipment is safety category 6: Other equipment with no limits.
This equipment is Noise Category 3: Can be used at all hours. No limits.
Metal
There is a large, blue, box of 8 sizes of metal countersink drills in the metal workshop -- use speeds about 30-60% lower than normal for that diameter - and Cutting oil.
This includes angled and square ones.
Wood
There are special wood ones in the wood area - kept on the stand of the DeWalt Handdrill and DeWalt Impact drill/electric screwdriver; in front of the red box with drills on the workbench side of the woodship.
There is a wooden box with small ones above the mitre saw.
