Drills, Machinist set: verschil tussen versies
| Regel 12: | Regel 12: | ||
This is for use of those that had [[Huvema HU760 Draaibank|Metal lathe]] and [[Abene VHF3 Metaalfrees machine|Metal router]] instructions '''only'''. | This is for use of those that had [[Huvema HU760 Draaibank|Metal lathe]] and [[Abene VHF3 Metaalfrees machine|Metal router]] instructions '''only'''. | ||
| − | See [[Metal Drills] and [[:Categorie:Boren]] for general use drills. | + | See [[Metal Drills]] and [[:Categorie:Boren]] for general use drills. |
= See also = | = See also = | ||
Versie van 8 mei 2023 om 15:21
This equipment is safety category 3:
- Mandatory, in person, instructions.
- Make sure you read the Wiki before asking.
This equipment is Noise Category 3: Can be used at all hours. No limits.
We keep a set of drills; 0.1mm steps separate from our normal Drills in the blue cabinet.
Instructions mandatory
This is for use of those that had Metal lathe and Metal router instructions only.
See Metal Drills and Categorie:Boren for general use drills.
See also
Boorsnelheid RPM / drilling speed and Cutting oil
History
Sets donated by Dirk-Willem mid 2019.
Sets replaced 8/6/2023 (paid by MSL)
