Drills, Machinist set: verschil tussen versies
| Regel 1: | Regel 1: | ||
[[Categorie:Tool]][[Categorie:Metal]][[Categorie:Small]][[Categorie:Boren]] | [[Categorie:Tool]][[Categorie:Metal]][[Categorie:Small]][[Categorie:Boren]] | ||
| − | |||
{{NoiseCat3}} | {{NoiseCat3}} | ||
| Regel 17: | Regel 16: | ||
[[Boorsnelheid RPM drilling speed|Boorsnelheid RPM / drilling speed]] and [[SnijOlie BoorOlie CuttingOil|Cutting oil]] | [[Boorsnelheid RPM drilling speed|Boorsnelheid RPM / drilling speed]] and [[SnijOlie BoorOlie CuttingOil|Cutting oil]] | ||
| + | |||
| + | = Location = | ||
| + | |||
| + | Blue cabinet. [[Huvema HU760 Draaibank|Metal lathe]] and [[Abene VHF3 Metaalfrees machine|Metal router]] instructions mandatory. | ||
| + | |||
| + | {{SafetyCat3}} | ||
= History = | = History = | ||
Versie van 10 mei 2023 om 11:16
This equipment is Noise Category 3: Can be used at all hours. No limits.
We keep a set of drills; 0.1mm steps separate from our normal Drills in the blue cabinet.
Instructions mandatory
This is for use of those that had Metal lathe and Metal router instructions only.
See Metal Drills and Categorie:Boren for general use drills.
See also
Boorsnelheid RPM / drilling speed and Cutting oil
Location
Blue cabinet. Metal lathe and Metal router instructions mandatory.
This equipment is safety category 3:
- Mandatory, in person, instructions.
- Make sure you read the Wiki before asking.
History
Sets donated by Dirk-Willem mid 2019.
Sets replaced 8/6/2023 (paid by MSL)
