Drills, Machinist set: verschil tussen versies
| Regel 1: | Regel 1: | ||
[[Categorie:Tool]][[Categorie:Metal]][[Categorie:Small]][[Categorie:Boren]]{{NoiseCat3}}{{SafetyCat3}} | [[Categorie:Tool]][[Categorie:Metal]][[Categorie:Small]][[Categorie:Boren]]{{NoiseCat3}}{{SafetyCat3}} | ||
| + | [[Categorie:Tools]][[Categorie:Cold metal working tools]] | ||
[[Bestand:mdrills-box2.jpeg|miniatuur|Doos 1-6]] | [[Bestand:mdrills-box2.jpeg|miniatuur|Doos 1-6]] | ||
Versie van 8 jul 2024 om 13:36
This equipment is Noise Category 3: Can be used at all hours. No limits.
This equipment is safety category 3:
- Mandatory, in person, instructions.
- Make sure you read the Wiki before asking.
We keep a set of drills; 0.1mm steps separate from our normal Metal_Drills in the blue cabinet.
Instructions mandatory
This is for use of those that had Metal lathe and Metal router instructions only.
See Metal Drills and Categorie:Boren for general use drills.
See also
Boorsnelheid RPM / drilling speed and Cutting oil
Location
Blue cabinet. Metal lathe and Metal router instructions mandatory.
History
Sets donated by Dirk-Willem mid 2019.
Sets replaced 8/6/2023 (paid by MSL)
