Wood Drills: verschil tussen versies

Uit MakerSpace Leiden
Ga naar: navigatie, zoeken
 
(9 tussenliggende versies door 2 gebruikers niet weergegeven)
Regel 1: Regel 1:
 +
[[Category:Tools]][[Category:Wood working tools]][[Category:Drills]]
 
{{SafetyCat6}} {{NoiseCat3}}
 
{{SafetyCat6}} {{NoiseCat3}}
[[Category:Tool]][[Category:Wood]]
 
 
 
There are two sets of 3-10 mm wood drills in the workshop. These are meant for wood ONLY -- and are very useful when drilling in tropical/hard woords.
 
There are two sets of 3-10 mm wood drills in the workshop. These are meant for wood ONLY -- and are very useful when drilling in tropical/hard woords.
  
Regel 12: Regel 11:
 
'''<big>These drills are for wood only</big>'''
 
'''<big>These drills are for wood only</big>'''
  
See also the [[HSS Drills]] for general purpose drilling and [[Spade drills] for larger holes. Or the [[Gaten zaag]] if you need to drill very large holes.
+
See also the [[Large HSS drills]] for general purpose drilling and [[Spade drills]] for larger holes. Or the [[Grote_Gaten_Zaag_-_Large_Hole_Saw|Gaten zaag]] if you need to drill very large holes.
 +
 
 +
== Maintenance  / Replacing ==
 +
 
 +
These tools will wear out - and the space will replace them.
 +
 
 +
Ask on the mailing lists to get them ordered --or-- buy a set from  [[http://www.hartwijk.nl Hartwijk]] or the Gamma (about the same price - the Hartwijk ones are better quality) and give the receipt to one of the Trustees. Anything under 15 euro's for 6-18 of them is OK.

Huidige versie van 17 nov 2024 om 21:37

This equipment is safety category 6: Other equipment with no limits.

This equipment is Noise Category 3: Can be used at all hours. No limits.

There are two sets of 3-10 mm wood drills in the workshop. These are meant for wood ONLY -- and are very useful when drilling in tropical/hard woords.

Wood-drill-tip.jpg

Do not use them for anything else. The very small points will break off.

Wooddrills.jpg

These drills are for wood only

See also the Large HSS drills for general purpose drilling and Spade drills for larger holes. Or the Gaten zaag if you need to drill very large holes.

Maintenance / Replacing

These tools will wear out - and the space will replace them.

Ask on the mailing lists to get them ordered --or-- buy a set from [Hartwijk] or the Gamma (about the same price - the Hartwijk ones are better quality) and give the receipt to one of the Trustees. Anything under 15 euro's for 6-18 of them is OK.