Wood Drills: verschil tussen versies
(→Maintenance / Replacing) |
|||
| (5 tussenliggende versies door 2 gebruikers niet weergegeven) | |||
| Regel 1: | Regel 1: | ||
| + | [[Category:Tools]][[Category:Wood working tools]][[Category:Drills]] | ||
{{SafetyCat6}} {{NoiseCat3}} | {{SafetyCat6}} {{NoiseCat3}} | ||
| − | |||
| − | |||
There are two sets of 3-10 mm wood drills in the workshop. These are meant for wood ONLY -- and are very useful when drilling in tropical/hard woords. | There are two sets of 3-10 mm wood drills in the workshop. These are meant for wood ONLY -- and are very useful when drilling in tropical/hard woords. | ||
| Regel 12: | Regel 11: | ||
'''<big>These drills are for wood only</big>''' | '''<big>These drills are for wood only</big>''' | ||
| − | See also the [[HSS | + | See also the [[Large HSS drills]] for general purpose drilling and [[Spade drills]] for larger holes. Or the [[Grote_Gaten_Zaag_-_Large_Hole_Saw|Gaten zaag]] if you need to drill very large holes. |
== Maintenance / Replacing == | == Maintenance / Replacing == | ||
Huidige versie van 17 nov 2024 om 21:37
This equipment is safety category 6: Other equipment with no limits.
This equipment is Noise Category 3: Can be used at all hours. No limits.
There are two sets of 3-10 mm wood drills in the workshop. These are meant for wood ONLY -- and are very useful when drilling in tropical/hard woords.
Do not use them for anything else. The very small points will break off.
These drills are for wood only
See also the Large HSS drills for general purpose drilling and Spade drills for larger holes. Or the Gaten zaag if you need to drill very large holes.
Maintenance / Replacing
These tools will wear out - and the space will replace them.
Ask on the mailing lists to get them ordered --or-- buy a set from [Hartwijk] or the Gamma (about the same price - the Hartwijk ones are better quality) and give the receipt to one of the Trustees. Anything under 15 euro's for 6-18 of them is OK.
