Large HSS drills: verschil tussen versies
(→See also) |
|||
| (11 tussenliggende versies door 2 gebruikers niet weergegeven) | |||
| Regel 1: | Regel 1: | ||
| − | [[ | + | [[Category:Tools]][[Category:Metal working tools]][[Category:Metal lathe and mill tools]][[Category:Wood working tools]][[Category:Drills]] |
{{SafetyCat6}} | {{SafetyCat6}} | ||
{{NoiseCat3}} | {{NoiseCat3}} | ||
| Regel 9: | Regel 9: | ||
[[Bestand:large-box2.jpeg| 400px |Doos HSS groot, metaal]] | [[Bestand:large-box2.jpeg| 400px |Doos HSS groot, metaal]] | ||
| − | Consult a table with RPMs - as that starts to matter at these sizes. | + | Consult a [[Boorsnelheid RPM drilling speed|table with RPMs]] - as that really starts to matter at these sizes. |
Also; unless you are dealing with very soft wood - expect to drill in steps of 1-3mm; going from small to large. | Also; unless you are dealing with very soft wood - expect to drill in steps of 1-3mm; going from small to large. | ||
| + | |||
| + | See [[Metal Drills] and [[:Categorie:Drills]] for normal size drills. | ||
= Thin material = | = Thin material = | ||
| Regel 17: | Regel 19: | ||
If you need to drill through material (e.g. sheets) that is 1/4 of the drill diameter of thinner; check the various tricks on YouTube first (https://www.giangrandi.org/mechanics/sheetmetaldrill/sheetmetaldrill.shtml). | If you need to drill through material (e.g. sheets) that is 1/4 of the drill diameter of thinner; check the various tricks on YouTube first (https://www.giangrandi.org/mechanics/sheetmetaldrill/sheetmetaldrill.shtml). | ||
| − | And generally - using one of the [[Step | + | And generally - using one of the [[Stappen boor / Getrapte boor / Step drill]] works better; or the [[Grote Gaten Zaag - Large Hole Saw]] for bigger holes. |
= Location = | = Location = | ||
| − | One box in the wood shop; one in the metal shop. Both near the [[Drill press / | + | One box in the wood shop; one in the metal shop. Both near the drill press, the [[Drill Press Wood / Boorkolom hout| Drill press wood]] and the [[Pillar Drill Metal / Kolomboor metaal|Pillar drill metal]]. |
| − | |||
= See also = | = See also = | ||
Huidige versie van 24 nov 2024 om 16:23
This equipment is safety category 6: Other equipment with no limits.
This equipment is Noise Category 3: Can be used at all hours. No limits.
These are generic large size drills (sizes 14, 16, 17,18, 19, 20,22 and 25) for use in wood, plastic, metal, etc.
Consult a table with RPMs - as that really starts to matter at these sizes.
Also; unless you are dealing with very soft wood - expect to drill in steps of 1-3mm; going from small to large.
See [[Metal Drills] and Categorie:Drills for normal size drills.
Thin material
If you need to drill through material (e.g. sheets) that is 1/4 of the drill diameter of thinner; check the various tricks on YouTube first (https://www.giangrandi.org/mechanics/sheetmetaldrill/sheetmetaldrill.shtml).
And generally - using one of the Stappen boor / Getrapte boor / Step drill works better; or the Grote Gaten Zaag - Large Hole Saw for bigger holes.
Location
One box in the wood shop; one in the metal shop. Both near the drill press, the Drill press wood and the Pillar drill metal.
See also
The Wood Drills and Mechanics Drill bit, Korte Boren, DIN1897
Ownership, History
Owned by the space; bought early March 2020.
