Drills, Machinist set: verschil tussen versies

Uit MakerSpace Leiden
Naar navigatie springen Naar zoeken springen
Geen bewerkingssamenvatting
Geen bewerkingssamenvatting
Regel 5: Regel 5:
[[Bestand:mdrills-box.jpeg|miniatuur|Doos 6-12]]
[[Bestand:mdrills-box.jpeg|miniatuur|Doos 6-12]]


We keep a set of drills; 0.1mm steps separate from our normal [[Drills]] in the blue cabinet.  
We keep a set of drills; 0.1mm steps separate from our normal [[Metal_Drills]] in the blue cabinet.  


= Instructions mandatory =
= Instructions mandatory =

Versie van 26 apr 2024 13:37

This equipment is Noise Category 3: Can be used at all hours. No limits.

Doos 1-6
Doos 6-12

We keep a set of drills; 0.1mm steps separate from our normal Metal_Drills in the blue cabinet.

Instructions mandatory

This is for use of those that had Metal lathe and Metal router instructions only.

See Metal Drills and Categorie:Boren for general use drills.

See also

Boorsnelheid RPM / drilling speed and Cutting oil

Location

Blue cabinet. Metal lathe and Metal router instructions mandatory.

This equipment is safety category 3:

  • Mandatory, in person, instructions.
  • Make sure you read the Wiki before asking.

History

Sets donated by Dirk-Willem mid 2019.

Sets replaced 8/6/2023 (paid by MSL)