Drills, Machinist set

Uit MakerSpace Leiden
Naar navigatie springen Naar zoeken springen
De printervriendelijke versie wordt niet langer ondersteund en kan weergavefouten bevatten. Werk uw browserbladwijzers bij en gebruik de gewone afdrukfunctie van de browser.

This equipment is Noise Category 3: Can be used at all hours. No limits.

This equipment is safety category 3:

  • Mandatory, in person, instructions.
  • Make sure you read the Wiki before asking.
Doos 1-6
Doos 6-12

We keep a set of drills; 0.1mm steps separate from our normal Metal_Drills in the blue cabinet.

Instructions mandatory

This is for use of those that had Metal lathe and Metal router instructions only.

See Metal Drills and Categorie:Boren for general use drills.

See also

Boorsnelheid RPM / drilling speed and Cutting oil

Location

Blue cabinet. Metal lathe and Metal router instructions mandatory.


History

Sets donated by Dirk-Willem mid 2019.

Sets replaced 8/6/2023 (paid by MSL)