3D Scanner: verschil tussen versies

Uit MakerSpace Leiden
Ga naar: navigatie, zoeken
(→‎Reinstall from 'zero')
 
(14 tussenliggende versies door 3 gebruikers niet weergegeven)
Regel 1: Regel 1:
−
[[Category:CNC]][[Category:SafetySheet]][[Category:Tool]][[Category:Manual]][[Category:Notes]][[Category:Measuring]]
+
[[Category:CNC]][[Category:SafetySheet]][[Category:Tool]][[Category:Measuring]]
  
−
[[Bestand:Kinect.jpg|miniatuur|XX replace by something taken in the space !]]
+
= OUT OF ORDER =
  
−
= Work in progress =
+
One of the protective lens covers has a crack. Being fixed (I took HDMI cable too) (dirkx/2021-05-30)
 +
 
 +
[[Bestand:Kinnectdeelnemer.JPG|miniatuur|]]
  
 
We have a 3D scanner based on a Microsoft XBox Kinekt device, the [[https://skanect.occipital.com Skanect]] software and a Mac Mini.
 
We have a 3D scanner based on a Microsoft XBox Kinekt device, the [[https://skanect.occipital.com Skanect]] software and a Mac Mini.
 +
 +
= Still to do =
 +
 +
# Write better manual
  
 
= Instructions for use =
 
= Instructions for use =
  
 
* Log in as Guest
 
* Log in as Guest
−
* Start the Scanect Software
+
* Start the Scanekt Software (in /Applications) vierkante smiley dan opent nieuw scherm, linkerbalk vind je applications, en kies dan skanect
−
* Configure for a BOX scan (1x1 is about righ).
+
* Configure for a BOX scan (1x1 is about righ for a think - 3x3 for a person).(kies object of body)
−
* Go through each of the steps.  
+
* Go through each of the steps in Scannekt.
 +
* resultaat kan je bewaren als .stl (share, export model)
 
* Save the resulting file (PLY) to a USB disk or SD card (slot is on the back, left hand side)
 
* Save the resulting file (PLY) to a USB disk or SD card (slot is on the back, left hand side)
  
−
== Reinstall from 'zero' ==
+
== Maintenance ==
  
−
If the machine ever needs to be re-installed -- then know that using the cmd-alt-R recovery method will bring it back to a rather old version of OSX (Mountain Lion). Which is too old for a `decent' version of Skanect.
+
Check, every 2-3 months, of all updates ran.
  
−
So you will have to upgrade to High Sierra (the max for this class of hardware).
+
== Reinstall from 'zero' ==
  
−
To upgrade it from that point - you have three options - none overly attractive:
+
See [[3D Scanner - installation notes]] for more information.
  
−
# Find someone who has a AppStore account that is that old - and which has gone through all these OS upgrades in the past. That person will have the required installs in his or her `Purchased' set. Note that you cannot go straight to High Sierra- you need one stepping stones (such as El Captain) as you are just outside the '8 year' jump range.
+
== Ownership ==
−
# Follow the instructions on https://www.macworld.co.uk/how-to/mac-software/download-old-os-x-3629363/
 
−
# Make a USB bootable USB disk. Either by following apples instructions or using http://dosdude1.com/highsierra/. The USB stick needs to be 8Gbyte or bigger.
 
−
 
 
−
In all cases - if you get a 'OS X could not be installed on your computer. No packages were eligible for install' erorr - then, in that same, screen, select the Terminal option under tools/utilities - and set the date to some date in 2015 using the `date(1)' command.
 
−
 
 
−
Once the install is done - force the time to be correct (the startup may be very slow if you leave the network connected) -- as it will otherwise hang/timeout/bomb on all SSL requests.
 
−
 
 
−
Older versions of OSX can given you the wrong `NTP time server setting' - so if that seems to be the case - use `nl.pool.ntp.org' in the System Preferences -> Date and Time -> Automatic.
 
−
 
 
−
Once this is done -  the following configs were done:
 
  
−
# No cloud/etc accounts, disable metrics/error report sending.
+
The Mac Mini, Kinekt and PSU are owned by Dirk-Willem van Gulik (zie [[:Category:OnLoan]]) and to be '''kept at the makerspace''' at all times. No exceptions.
−
# Username for admin is currently mslmacmini
 
−
# Disable wifi, set DHCP on wired, set sensible clientid for dhcp (macmini-for-3d)
 
−
# Enable guest, and login without password into guest.
 
−
# Enable screen lock for admin and auto log out after 5 hours so admin cannot hog the screen by accident.
 
−
# All updates automatic
 
−
# Enable wake up at 2 am at least once a week to enforce update fetching.
 
−
# Auto off after 1 hour (skanekt runs can be slow)
 
−
# Install skanect
 
−
# Enable SSH and VNC
 
−
# Install Xcode 10.3 (last version for High Sierra), macports and then inkscape
 
−
# Install skanect and/or RTAB-Map according to instructions. No drivers needed for the kinekt
 
−
 
 
−
== Ownership ==
 
  
−
The Mac Mini, Kinekt and PSU are owned by Dirk-Willem van Gulik (zie [[:Category:OnLoan]]) and to be '''kept at the makerspace''' at all times. No exceptions.
+
The UK/NL adapter was donated by Hans. The screen, HMDI/DVI cable and mouse were donated by Hans Beerman.
  
 
== Usage ==
 
== Usage ==
Regel 56: Regel 40:
 
{{SafetyCat5}}  
 
{{SafetyCat5}}  
 
{{NoiseCat3}}
 
{{NoiseCat3}}
 +
{{InBruikleen|naam=Dirk-Willem}}

Huidige versie van 30 mei 2021 om 21:26


OUT OF ORDER

One of the protective lens covers has a crack. Being fixed (I took HDMI cable too) (dirkx/2021-05-30)

Kinnectdeelnemer.JPG

We have a 3D scanner based on a Microsoft XBox Kinekt device, the [Skanect] software and a Mac Mini.

Still to do

  1. Write better manual

Instructions for use

  • Log in as Guest
  • Start the Scanekt Software (in /Applications) vierkante smiley dan opent nieuw scherm, linkerbalk vind je applications, en kies dan skanect
  • Configure for a BOX scan (1x1 is about righ for a think - 3x3 for a person).(kies object of body)
  • Go through each of the steps in Scannekt.
  • resultaat kan je bewaren als .stl (share, export model)
  • Save the resulting file (PLY) to a USB disk or SD card (slot is on the back, left hand side)

Maintenance

Check, every 2-3 months, of all updates ran.

Reinstall from 'zero'

See 3D Scanner - installation notes for more information.

Ownership

The Mac Mini, Kinekt and PSU are owned by Dirk-Willem van Gulik (zie Category:OnLoan) and to be kept at the makerspace at all times. No exceptions.

The UK/NL adapter was donated by Hans. The screen, HMDI/DVI cable and mouse were donated by Hans Beerman.

Usage

This equipment is safety category 5: Equipment that is relatively fragile or expensive

  • In person instructions is not mandatory.
  • Reading the wiki, and following the instructions, is mandatory.

This equipment is Noise Category 3: Can be used at all hours. No limits.

Dit gereedschap is van Dirk-Willem en in bruikleen gegeven aan de Space.
Let bij het gebruik op de extra regels.

Overgenomen van "https://wiki.makerspaceleiden.nl/mediawiki/index.php?title=3D_Scanner&oldid=10345"