Drills, Machinist set: verschil tussen versies
| Regel 5: | Regel 5: | ||
[[Bestand:mdrills-box.jpeg|miniatuur|Doos 6-12]] | [[Bestand:mdrills-box.jpeg|miniatuur|Doos 6-12]] | ||
| − | We keep a set of drills; 0.1mm steps separate from our normal [[ | + | We keep a set of drills; 0.1mm steps separate from our normal [[Metal_Drills]] in the blue cabinet. |
= Instructions mandatory = | = Instructions mandatory = | ||
Versie van 26 apr 2024 om 15:37
This equipment is Noise Category 3: Can be used at all hours. No limits.
We keep a set of drills; 0.1mm steps separate from our normal Metal_Drills in the blue cabinet.
Instructions mandatory
This is for use of those that had Metal lathe and Metal router instructions only.
See Metal Drills and Categorie:Boren for general use drills.
See also
Boorsnelheid RPM / drilling speed and Cutting oil
Location
Blue cabinet. Metal lathe and Metal router instructions mandatory.
This equipment is safety category 3:
- Mandatory, in person, instructions.
- Make sure you read the Wiki before asking.
History
Sets donated by Dirk-Willem mid 2019.
Sets replaced 8/6/2023 (paid by MSL)
