Grote Gaten Zaag - Large Hole Saw: verschil tussen versies
| Regel 1: | Regel 1: | ||
{{SafetyCat6}} {{NoiseCat3}} | {{SafetyCat6}} {{NoiseCat3}} | ||
| − | [[Category:Tool]][[Category:Wood]][[Category:Small]] | + | [[Category:Tool]][[Category:Wood]][[Category:Small]][[Categorie:Wood]] |
There are is a set of large hole saws in the workshop. | There are is a set of large hole saws in the workshop. | ||
Versie van 8 mei 2023 om 16:01
This equipment is safety category 6: Other equipment with no limits.
This equipment is Noise Category 3: Can be used at all hours. No limits.
There are is a set of large hole saws in the workshop.
See also the HSS Drills and Wood Drills for general purpose drilling and Spade drills for larger holes. Or the Step-drill/getrapte boor for thin sheets and the Large HSS drills.
You need to make sure sawdust does not build up - you'll burn the wood otherwise.
Saw dust problems
It is often a good idea to first drill a hole (8-12mm) just inside (if you are making a hole) or outside (if you are making a disk) circle you are going to saw. This lets the sawdust escape.
Speed
Location
Usually above the wood-workbench on the side of the pillar dril/mitre saw.
Maintenance / Replacing
These tools will wear out - and the space will replace them.
Ask on the mailing lists to get them ordered.
Ownership & History
Owned by the space. Current set bought early May 2019.
The doorn and the 44mm saw where replaced 2019-11-12; as they broke. Metal fatique. New model fancier (15 euro level).
