Grote Gaten Zaag - Large Hole Saw: verschil tussen versies
Regel 8: | Regel 8: | ||
See also the [[HSS Drills]] and [[Wood Drills]] for general purpose drilling and [[Spade drills]] for larger holes. Or the [[Step-drill/getrapte boor]] for thin sheets and the [[Large HSS drills]]. | See also the [[HSS Drills]] and [[Wood Drills]] for general purpose drilling and [[Spade drills]] for larger holes. Or the [[Step-drill/getrapte boor]] for thin sheets and the [[Large HSS drills]]. | ||
+ | |||
+ | It is often a good idea to first drill a hole (8-12mm) just inside (if you are making a hole) or outside (if you are making a disk) circle you are going to saw. This lets the sawdust escape. | ||
+ | |||
+ | [[Bestand:largeholesaw-escape.jpg|200px]] | ||
+ | |||
== Speed == | == Speed == |
Versie van 8 okt 2020 om 18:58
This equipment is safety category 6: Other equipment with no limits.
This equipment is Noise Category 3: Can be used at all hours. No limits.
There are is a set of large hole saws in the workshop.
See also the HSS Drills and Wood Drills for general purpose drilling and Spade drills for larger holes. Or the Step-drill/getrapte boor for thin sheets and the Large HSS drills.
It is often a good idea to first drill a hole (8-12mm) just inside (if you are making a hole) or outside (if you are making a disk) circle you are going to saw. This lets the sawdust escape.
Speed
Location
Usually above the wood-workbench on the side of the pillar dril/mitre saw.
Maintenance / Replacing
These tools will wear out - and the space will replace them.
Ask on the mailing lists to get them ordered.
Ownership & History
Owned by the space. Current set bought early May 2019.
The doorn and the 44mm saw where replaced 2019-11-12; as they broke. Metal fatique. New model fancier (15 euro level).