Router Table / Tafelfrees: verschil tussen versies
k (DirkWillem heeft pagina Router Table hernoemd naar Router Table / Tafelfrees) |
|||
| Regel 1: | Regel 1: | ||
| − | [[Category:SafetySheet]][[Category:Tool]][[Category:Wood]][[Category:Metal]]{{SafetyCat3}}{{NoiseCat2}}[[Category:OnLoan]] | + | [[Category:SafetySheet]][[Category:Tool]][[Category:Wood]][[Category:Metal]]{{SafetyCat3}}{{NoiseCat2}}{{DustControl2}}[[Category:OnLoan]] |
Router Table. | Router Table. | ||
Versie van 8 jan 2019 om 23:57
This equipment is safety category 3:
- Mandatory, in person, instructions.
- Make sure you read the Wiki before asking.
This equipment is Noise Category 2:
Can be used at all hours, but in moderation.
Be considerate; if you feel you need to wear ear protection,
then only use the tool between 07:00 and 19:00.
This equipment is should be used with active dust control.
Connect the shopvac prior to use.
Router Table.
WARNING: has an imperial collet !
Be very careful with the collet sizes; a 1/4 of an inch is almost 6mm - but not quite. Putting a 6mm bit into a 1/4th of an inch collet will absolotely ruin it. And they are expensive and hard to replace (long lead team; 30-60 euro's).
Ownership
Owned by HansD. See Category:OnLoan.
