SAFETY: verschil tussen versies

Uit MakerSpace Leiden
Ga naar: navigatie, zoeken
(Category 4)
 
(39 tussenliggende versies door 6 gebruikers niet weergegeven)
Regel 1: Regel 1:
 +
[[Category:Procedures]][[Category:Safety]]
  
Veiligheid  -- see the pages [[SafetySheet]] and [[NewMachine]] for info about adding stuff.
+
Veiligheid  -- see the pages [[Safety Sheet]] and [[Add a new tool to the wiki]] for info about adding stuff.
  
== Verantwoordelijkheid ==
+
== Verantwoordelijkheid / responsibility ==
  
De eindverantwoorlijkheid voor een veilige werkomgeving en gedrag ligt bij het bestuur. Dat maakt de situatie
+
The ultimate responsibility for a safe working environment and behavior lies with the board of the MakerSpace Leiden. This makes the situation different compared to working at home. You need to be aware of the safety of other people as well, not just yourself.
anders dan thuis. Je hebt niet alleen jezelf heel te houden, maar ook anderen.
 
  
Deelnemers behoren zich veilig te gedragen, en onveilige gedragingen en situaties te melden bij het bestuur.
+
Participants should behave safely and report unsafe behaviors and situations to the board.
  
Bij aantal machines is het verplicht bepaalde storingen of problemen te melden. Dit dient zo snel mogelijk; maar uiterlijk binnen 24 te gebeuren. Dit staat in de machinebeschrijving.
+
With a number of machines, it is mandatory to report certain faults or problems. This should be done as soon as possible; but at the latest within 24 hours. This is in the machine description.
  
 
[[Bestand:safetysheet-Makerspace.png|right|300px|General Safety Sheet] Makerspace Leiden]]
 
[[Bestand:safetysheet-Makerspace.png|right|300px|General Safety Sheet] Makerspace Leiden]]
  
= Index risico gereedscap =
+
== Safety related equipment ==
 +
 
 +
<categorytree mode="pages">Safety</categorytree>
 +
 
 +
= Index risico gereedschap =
  
 
Risk categories:
 
Risk categories:
  
# '''Highest' risk''':  mandatory instructions, ''[[https://github.com/MakerSpaceLeiden/Manuals/blob/master/Verklaring-gevaarlijke-apparatuur.txt liability waiver]]'' on file, approval from the trustees, two people present at all times - and can only be used between 07:00 and 19:00.
+
# '''Highest' risk''':  mandatory instructions, ''[[https://mijn.makerspaceleiden.nl/waiverform/  liability waiver]]'' on file, approval from the trustees, two people present at all times - and can only be used between 07:00 and 19:00.
# '''High risk''': Mandatory instructions, ''[[https://github.com/MakerSpaceLeiden/Manuals/blob/master/Verklaring-gevaarlijke-apparatuur.txt liability waiver]]'' on file, approval from the trustees, but Ok to operate alone.
+
# '''High risk''': Mandatory instructions, ''[[https://mijn.makerspaceleiden.nl/waiverform/ liability waiver]]'' on file, approval from the trustees, but Ok to operate alone.
 
# Mandatory instructions '''prior to use'''.
 
# Mandatory instructions '''prior to use'''.
 
# Equipment that is dangerous - instructions strongly advised but not mandatory
 
# Equipment that is dangerous - instructions strongly advised but not mandatory
Regel 30: Regel 34:
 
# No limits.
 
# No limits.
  
== Category 1 ==
+
= Safety categories  =
{{SafetyCat1}}
+
== Category 1 ==  
  
* [[Cirkelzaagtafel_SCM_L'Invincible|Wood circular saw table - cirkelzaagtafel]]
+
<categorytree mode="pages">SafetyCat1</categorytree>
* Planer - vandiktebank
+
== Category 2 ==
* [[Vlakbank|Jointer - vlakbank]]
 
  
== Category 2 ==
+
<categorytree mode="pages">SafetyCat2</categorytree>
{{SafetyCat2}}:
 
  
* [[Lintzaag Centauro 500 CO|Wood bandsaw - lintzaag]]
+
== Category 3 ==
* [[Houtdraaibank|Wood lathe - houtdraaibank]]
 
* [[Huvema_HU760_Draaibank| Metal lathe/draaibank]]
 
* [[Abene_VHF3_Metaalfrees_machine |Abene Mill - metaalfrees]]
 
* [[Large_Grinder|Large Grinder / Grote Slijpert]]
 
  
== Category 3 ==
+
<categorytree mode="pages">SafetyCat3</categorytree>
 +
== Category 4 ==  
  
{{SafetyCat3}}
+
<categorytree mode="pages">SafetyCat4</categorytree>
 +
== Category 5 ==
  
* [[Grote_CNC_freestafel|Large CNC cutter]] -- noise restructions: 07:00-19:00 only.
+
<categorytree mode="pages">SafetyCat5</categorytree>
* [[Handleiding_Lasersaur|Large Laser cutter]] (zie ook verplichte rapportage/kosten)
+
== Category 6 ==
* [[LaserCutter|Small Laser cutter]]  (zie ook verplichte rapportage/kosten)
 
* [[AfkortZaag|Wood Mitre saw of Afkortzaag]] -- be considerate to our neighbours after 19:00.
 
* Welding_equipment  (zie ook verplichte rapportage/kosten)
 
* [[12_Ton_Pers|12 Ton Hydraulische Press]]
 
* Sanding_Cabinet
 
* Metal_bandsaw
 
* [[VinylCutter|Vinyl_cutter]]
 
* [[SMD_assemblage_tafel |PCB Reflow Oven]]
 
* T-Shirt_hotplate
 
* [[Ultimaker|Ultimaker 3D Printer]]
 
  
== Category 4 ==
+
<categorytree mode="pages">SafetyCat6</categorytree>
{{SafetyCat4}}
 
  
* Wood [[drill press / boorkolom]]
+
= Noise categories =
* Metal [[drill press / boorkolom]]
+
== Category 1 ==
* High speed Metal drill press / boorkolom
 
* Electric and battery powered tools (Drill, sander, orbital grinders, mill)
 
* Pneumatic tools (Nibbler, Sander, Grinder, [[Combi-tacker|Staple gun]]) -- be considerate to our neighbours after 19:00.
 
* Electric standing jigsaw for wood
 
* Electric band/disk grinder for wood
 
* [[Slijpmachine_klein|Kleine slijpsteen]]
 
  
== Category 5 ==
+
[[:Categorie:NoiseCat1]]
 +
<categorytree mode="pages">NoiseCat1</categorytree>
 +
== Category 2 ==
  
Equipment that is relatively fragile or expensive - so instructions strongly advised if you have not used them before -  but not mandatory
+
[[:Categorie:NoiseCat2]]
 
+
<categorytree mode="pages">NoiseCat2</categorytree>
* Soldering equipment (air, tipped)
+
== Category 3 ==
* [[SafetyDesoldeerbout|De-soldeerbout - lucht]]
 
* Veneer calipers
 
* Various cutters for the Abene mill.
 
* [[Ritser|Ritser]] - diamandpunt voor onderhoud slijpstenen.
 
* [[Labvoedingen]] - power supplies on the workbench (they go up to about 100 volt & 10 amps).
 
 
 
== Category 6 ==
 
 
 
Other equipment with no limits
 
  
* [[3_Ton_tandheugelpers|3 Ton hand pers/press]]
+
[[:Categorie:NoiseCat3]]
* Hand tools
+
<categorytree mode="pages">NoiseCat3</categorytree>
* Measuring tools
 

Huidige versie van 16 nov 2024 om 23:55


Veiligheid -- see the pages Safety Sheet and Add a new tool to the wiki for info about adding stuff.

Verantwoordelijkheid / responsibility

The ultimate responsibility for a safe working environment and behavior lies with the board of the MakerSpace Leiden. This makes the situation different compared to working at home. You need to be aware of the safety of other people as well, not just yourself.

Participants should behave safely and report unsafe behaviors and situations to the board.

With a number of machines, it is mandatory to report certain faults or problems. This should be done as soon as possible; but at the latest within 24 hours. This is in the machine description.

General Safety Sheet] Makerspace Leiden

Safety related equipment


Index risico gereedschap

Risk categories:

  1. Highest' risk: mandatory instructions, [liability waiver] on file, approval from the trustees, two people present at all times - and can only be used between 07:00 and 19:00.
  2. High risk: Mandatory instructions, [liability waiver] on file, approval from the trustees, but Ok to operate alone.
  3. Mandatory instructions prior to use.
  4. Equipment that is dangerous - instructions strongly advised but not mandatory
  5. Equipment that is relatively fragile or expensive - so instructions strongly advised if you have not used them before - but not mandatory
  6. Other equipment with no limits - not considered overly dangerous.

Noise categories:

  1. Can only be used between 07:00 and 19:00
  2. Can be used outside those hours in moderation. But try to be considerate. And if you feel a need to wear ear protection - you are probably too noisy!
  3. No limits.

Safety categories

Category 1

Category 2


Category 3

Category 4

Category 5

Category 6

  MT2
  MT4


Noise categories

Category 1

Categorie:NoiseCat1

Category 2

Categorie:NoiseCat2

Category 3

Categorie:NoiseCat3

  MT2
  MT4