SAFETY: verschil tussen versies

Uit MakerSpace Leiden
Ga naar: navigatie, zoeken
(index risico gereedscap)
 
(64 tussenliggende versies door 8 gebruikers niet weergegeven)
Regel 1: Regel 1:
 +
[[Category:Procedures]][[Category:Safety]]
  
 +
Veiligheid  -- see the pages [[Safety Sheet]] and [[Add a new tool to the wiki]] for info about adding stuff.
  
 +
== Verantwoordelijkheid / responsibility ==
  
Veiligheid
+
The ultimate responsibility for a safe working environment and behavior lies with the board of the MakerSpace Leiden. This makes the situation different compared to working at home. You need to be aware of the safety of other people as well, not just yourself.
  
== verantwoordelijkheid ==
+
Participants should behave safely and report unsafe behaviors and situations to the board.
  
De eindverantwoorlijkheid voor een veilige werkomgeving en gedrag ligt bij het bestuur. Dat maakt de situatie
+
With a number of machines, it is mandatory to report certain faults or problems. This should be done as soon as possible; but at the latest within 24 hours. This is in the machine description.
anders dan thuis. Je hebt niet alleen jezelf heel te houden, maar ook anderen.
 
  
Deelnemers behoren zich veilig te gedragen, en onveilige gedragingen en situaties te melden bij het bestuur.
+
[[Bestand:safetysheet-Makerspace.png|right|300px|General Safety Sheet] Makerspace Leiden]]
  
Bij aantal machines is het verplicht bepaalde storingen of problemen te melden. Dit dient zo snel mogelijk; maar uiterlijk binnen 24 te gebeuren. Dit staat in de machine beschrijving.
+
== Safety related equipment ==
  
[[Bestand:safetysheet-Makerspace.png|right|300px|General Safety Sheet] Makerspace Leiden]]
+
<categorytree mode="pages">Safety</categorytree>
 +
 
 +
= Index risico gereedschap =
 +
 
 +
Risk categories:
 +
 
 +
# '''Highest' risk''':  mandatory instructions, ''[[https://mijn.makerspaceleiden.nl/waiverform/  liability waiver]]'' on file, approval from the trustees, two people present at all times - and can only be used between 07:00 and 19:00.
 +
# '''High risk''': Mandatory instructions, ''[[https://mijn.makerspaceleiden.nl/waiverform/ liability waiver]]'' on file, approval from the trustees, but Ok to operate alone.
 +
# Mandatory instructions '''prior to use'''.
 +
# Equipment that is dangerous - instructions strongly advised but not mandatory
 +
# Equipment that is relatively fragile or expensive - so instructions strongly advised if you have not used them before -  but not mandatory
 +
# Other equipment with no limits - not considered overly dangerous.
  
= index risico gereedscap =
+
Noise categories:
  
Highest category - mandatory instructions, liability waiver on file, approval from the trustees, two people present at all times - and can only be used between 07:00 and 19:00 as they make a lot of noise:
+
# Can only be used between 07:00 and 19:00
 +
# Can be used outside those hours in moderation. But try to be considerate. And if you feel a need to wear ear protection - you are probably too noisy!
 +
# No limits.
  
* [[Cirkelzaagtafel_SCM_L%'Invincible|Wood circle saw table - cirkelzaagtafel]]
+
= Safety categories  =
* Planer - vandiktebank
+
== Category 1 ==
* [[Vlakbank|Jointer - vlakbank]]
 
  
Mandatory instructions, liability waiver on file, approval from the trustees, but Ok to operate alone.
+
<categorytree mode="pages">SafetyCat1</categorytree>
 +
== Category 2 ==
  
With respect to noise - be kind and considerate after 19:00 - and limit yourself to sporadic  low-noise use:
+
<categorytree mode="pages">SafetyCat2</categorytree>
  
* [[Lintzaag_Centauro_500_CO |Wood bandsaw - lintzaag]
+
== Category 3 ==
* [[Houtdraaibank|Wood lathe - houtdraaibank]]
 
* Metal Lathe
 
* [[Abene_VHF3_Metaalfrees_machine |Abene Mill - metaaalfrees]]
 
* Large Grinder
 
  
Mandatory instructions
+
<categorytree mode="pages">SafetyCat3</categorytree>
 +
== Category 4 ==
  
* [[Grote_CNC_freestafel|Large CNC cutter]] -- noise restructions: 07:00-19:00 only.
+
<categorytree mode="pages">SafetyCat4</categorytree>
* [[Handleiding_Lasersaur|Large Laser cutter]] (zie ook verplichte rapportage/kosten)
+
== Category 5 ==
* [[LaserCutter|Small Laser cutter]]  (zie ook verplichte rapportage/kosten)
 
*Wood Mitre saw -- be considerate to our neighbours after 19:00.
 
* Welding_equipment  (zie ook verplichte rapportage/kosten)
 
* [[12_Ton_Pers|12 Ton Hydraulische Press]]
 
* Sanding_Cabinet
 
* Metal_bandsaw
 
* [[VinylCutter|Vinyl_cutter]]
 
* PCB_Reflow_Oven
 
* T-Shirt_hotplate
 
* [[Ultimaker|Ultimaker 3D Printer]]
 
  
Equipment that is dangerous - instructions strongly advised but not mandatory
+
<categorytree mode="pages">SafetyCat5</categorytree>
 +
== Category 6 ==
  
* Wood drill column
+
<categorytree mode="pages">SafetyCat6</categorytree>
* Metal drill column
 
* Electric and battery powered tools (Drill, sander, orbital grinders, mill)
 
* Pneumatic tools (Nibbler, Sander, Grinder, [[Combi-tacker|Staple gun]])  -- be considerate to our neighbours after 19:00.
 
* Electric standing jigsaw for wood
 
* Electric band/disk grinder for wood
 
* [[Slijpmachine_klein|Kleine slijpsteen]]
 
  
Equipment that is relatively fragile or expensive - so instructions strongly advised if you have not used them before - but not mandatory
+
= Noise categories =
 +
== Category 1 ==
  
* Soldering equipment (air, tipped)
+
[[:Categorie:NoiseCat1]]
* [[SafetyDesoldeerbout|De-soldeerbout - lucht]]
+
<categorytree mode="pages">NoiseCat1</categorytree>
* Veneer calipers
+
== Category 2 ==
* Various cutters for the Abene mill.
 
* [[Ritser|Ritser]] - diamandpunt voor onderhoud slijpstenen.
 
  
Other equipment with no limits
+
[[:Categorie:NoiseCat2]]
 +
<categorytree mode="pages">NoiseCat2</categorytree>
 +
== Category 3 ==
  
* [[3_Ton_tandheugelpers|3 Ton hand pers/press]]
+
[[:Categorie:NoiseCat3]]
* Hand tools
+
<categorytree mode="pages">NoiseCat3</categorytree>
* Measuring tools
 

Huidige versie van 16 nov 2024 om 23:55


Veiligheid -- see the pages Safety Sheet and Add a new tool to the wiki for info about adding stuff.

Verantwoordelijkheid / responsibility

The ultimate responsibility for a safe working environment and behavior lies with the board of the MakerSpace Leiden. This makes the situation different compared to working at home. You need to be aware of the safety of other people as well, not just yourself.

Participants should behave safely and report unsafe behaviors and situations to the board.

With a number of machines, it is mandatory to report certain faults or problems. This should be done as soon as possible; but at the latest within 24 hours. This is in the machine description.

General Safety Sheet] Makerspace Leiden

Safety related equipment


Index risico gereedschap

Risk categories:

  1. Highest' risk: mandatory instructions, [liability waiver] on file, approval from the trustees, two people present at all times - and can only be used between 07:00 and 19:00.
  2. High risk: Mandatory instructions, [liability waiver] on file, approval from the trustees, but Ok to operate alone.
  3. Mandatory instructions prior to use.
  4. Equipment that is dangerous - instructions strongly advised but not mandatory
  5. Equipment that is relatively fragile or expensive - so instructions strongly advised if you have not used them before - but not mandatory
  6. Other equipment with no limits - not considered overly dangerous.

Noise categories:

  1. Can only be used between 07:00 and 19:00
  2. Can be used outside those hours in moderation. But try to be considerate. And if you feel a need to wear ear protection - you are probably too noisy!
  3. No limits.

Safety categories

Category 1

Category 2


Category 3

Category 4

Category 5

Category 6

  MT2
  MT4


Noise categories

Category 1

Categorie:NoiseCat1

Category 2

Categorie:NoiseCat2

Category 3

Categorie:NoiseCat3

  MT2
  MT4